COP Security 15-VT08-CDRW Manual de usuario

1 User’s manual for DVR *This manual is tailored for MPEG4-100FPS/120FPS 9-channel and 16-channel digital video recorder *This manua

Installation Notice Attention: Before connecting to the other equipments, please make sure that the device is powered off. Do not hot plug in! 2.1 C

192.168.0.1552006-07-1011:28:01AM4FPS95KBPSLIVE192.168.0.1552006-07-1011:28:01AM4FPS95KBPSLIVE192.168.0.1552006-07-1011:28:01AM4FPS95KBPSLIVECAM2CAM

1.3 Particular operation of the IE Client ⑴ Alarm: If the DVR sends motion alarm, the channel name flashes on the screen and a word

Button Screen mode Screen 1-channel 4-channel 6-channel 8-channel 10

9-channel 10-channel 13-channel 16-channel ⑶ Rotation/Next : Rotation. If you press this button, the picture will be displayed from channel

: Next. Switch the pictures from current channel to next channel. ⑷ Sound volume : The volume is from low to high when the bar is shifted from left

③ : This button is for the IRIS adjustment. If the light situation of the area where camera is located is too strong, press to decrease volume of

In the same way, the protocol set in the Fast speed dome should be PELCO_D, the baud rate should be 2400kpbs, and the address should be 01. ⑹ Chan

⑺ Disconnect/Connect : Press this to terminate the connection between DVR and the IE client. : Press this button to regain the connection betwee

16 2 Remote software operation Remote software refers to Network Client, hereinafter abbreviated as “Net Client” Function:  Live video and audio;

17CAM12006 07 10 10:52:14CAM22006 07 10 10:52:14CAM32006 07 10 10:52:14CAM42006 07 10 10:52:14CAM52006 07 10 10:52:14CAM62006 07 10 10:52:14CAM72006

2.2.2 Install tool One cross-screwdriver 2.2.3 Install process ⑴ Open the DVR by screwdriver ⑵ Set one as master and the other as slave if two HDD

The button description: Number Icon Description Function  Live control Press this button to view the live picture of the DVR, and the user ca

 Connect/ Disconnect Connect/disconnect the connection between DVR and Net Client.  Option Setup the options, such as: control port, initia

2.2 Connection (1) Click “connect” icon in the main window of the Net Client to enter the connection setup menu. (2) Input Address & ID / Passw

(3) Then, click “Connect” button. 2.3 Live Press LIVE button in the main window of the Net Client, the live picture would display in the screen an

2.4 Remote playback And then, use the following button to control playback. 22

 : Stop  : Play  : Pause  : Fast Backward  : Reverse by frame 

2.5 Backup And then, a dialogue box pops up and the backup begins. 24

The backup file name, backup progress and the size of the backup file are shown in the dialogue box. When the backup progress is over, this dialogu

2.6 Local playback Attention:  This function can be used not any in network, but also in stand-alone; 26

The file recorded by this DVR is postscript file, whose suffix is “.ps”. Any postscript file in the HDD or CD/DVD can be played back, containing th

 Jump line area The picture blow is the connection section of the HDD. Jump line area  Jump line according to the cutline above MASTER

2.8 Snap shot : Capture the picture of the record and the live picture.  Select the channel whose picture is ready for saving or printing fi

29

2.9 Option Press button to setup the “control port”, “stream port”, “initial mode” and “audio connect”. Control port/stream port: The port mus

(Y/N)”.Press “Y” key on keyboard or click “Yes” button to exit. Press “N” key on keyboard or click “No” button to return to the main menu. Attenti

primary ATA interface is HDD A, the slave is HDD B. The master HDD connected to secondary ATA interface is HDD C, the slave is HDD D.  The record seq

19 pins are in the other row). Make sure pins are plugged into interface exactly. ④ Connect the power supply to HDD  Sketch map of installation  C

First, put the HDD into the HDD fixation rackSecond, fix the HDD by two screws on both sidesThird, connect the HDD cableFourth, connect the power supp

2.3 Back panel and interface terminals Attention: The interfaces on the back panel please refer to the real object, there might be slightly differ

1 Video input 1-16 2 Spot output 3 Video output 4 S video output 5 Audio output 17

6 LAN port 7 Audio in 1-4 8 Alarm input1-16 9 Alarm output 18

10 Fan vent 11 Power plug 12 USB port 13 VGA port 14 RS 232 port（Null） 15 RS485 port 19

2 Before operation, we strongly advise you to read the user manual and keep it properly for later using. This manual is an operation guide but no

2.3.2 Back panel of 9-channel DVR CAM1CAM2CAM3CAM4CAM5CAM6CAM7CAM8CAM9SPOT OUTVIDEO OUTS VIDEOAUDIO OUTAUDIO IN 1AUDIO IN 2AUDIO IN 3AUDIO IN 41234412

2.4 Front panel and interface terminals Attention: The buttons on the front panel please refer to the entity, there might be slightly difference fro

7 Zoom/Focus control 8 Audio on/off button 9 Backup button 10 Menu button 11 Function button 12 Status button 13 Leftward 14 Upward 15 Ente

23 Fast Reverse 24 Fast forward 25 Stop 26 Remote controller receiver 27 USB port 28 LED indicator lights, for power, HDD and backup, network

2.5 Remote controller description  Put the Battery into the Remote controller:  Open the battery cover of Remote controller  Put in two AAA batteri

2 Backup button: Press this button, the DVR enters the backup menu (Fig3.3.7 USB backup). The details will be given in Chapter 3.3.3: BACKUP 3 Infor

10 Search button: Press this button to enter to recording search page 11 Upward 12 Leftward 13 Rightward 14 Downward 15 SR is for Reverse when t

2722 Pan/Tilt control 23 Audio switch 24 Log file button 25 Picture in picture: select the channel to display as small picture first, and then

 Whether the battery’s anode and cathode are in the correct position or not  The battery is ran out of  Whether there is barrier between the Remote

Attention: The alarm output is TTL high level control. The connection method is described in details in the picture above. This DVR can carry sixte

3Table of Contents Digital Video Recorder (DVR) Introduction ...

30  Open/Close input N.O: Normal open. It will be closed when triggered. DVR must be set as low voltage alarm; N.C: Normal close. It will be opene

Basic operation guide 3.1 How to start the DVR Attention: Before power on the machine, please make sure the power input (110V/220V) of DVR is eligib

32 machine is initialised. (The detail of admin password and user password are described in chapter 3.2.1 SETUP-SYSTEM). Input default password-“00

SENSOR/ALARMAUDIONETWORKSTORAGERECORDLIVESYSTEMCURRENT STATUS VIEWDEFAULT SETUPSOFTWARE UPDATEVGA PREQ CHANGETIME STAMP FORMATTIME OSD FORMATTIME FORM

There are two users in the origin DVR system. One is Admin which has highest priority to set system’s configuration and whose password is “0000”, the

Press the “Enter” key to enter the sub-menu and press the “Menu” key to get back to the main menu. 3.2.1 SETUP-SYSTEM The menu is as above: (Fig3.2.

36 administrator is authorized to change it which is comprised of four numbers between 0 and 9.  PASSWORD CHECK: If you choose “ON”, users have to

BOTTOM-BLACK: Time is displayed at the bottom in black OFF: There is no time displayed in the play back mode.  CURRENT STATUS VIEW: Choose “ON”,

 SOFTWARE UPDATE: (Fig3.2.8 Software update)  USB UPDATE: Update firmware from USB flash memory  Press USB UPDATE and below screen will pop up

 Update firmware:  Make sure the updating firmware is in the USB disk  Do not power off the DVR during updating;  Press “ENTER” button to start up

4 3.2.1 SETUP-SYSTEM ... 35 3.2.2 SE

about two minutes to update.  When the erase, blank check and update are done, system will check the new program which is written just now.  After t

 CAMERA NAME: Name of the channel. It is comprised of the English letters from “a” to “z” or the numbers from “0” to “9”.  CAMERA STATUS: I

are seventeen options for users: PELCO_D-2400, PELCO_D-9600, PELCO_P-4800, PELCO_P-9600, SCC641-9600, SCC641-19200, SK2161-9600, CNB_102-9600, ADTECH-

43 SPOT QUAD DWELL: Channel-switching circulates from quad 1 to quad 4 (The order is: channel 1,2,3,4→channel 5,6,7,8 →channel 9,10,11,12→channel

maximum is 4. The record resolution is 360*288(PAL)/360*240(NTSC), there are seven frame rates to choose: 0, 1, 2, 4, 8, the maximum is 8. Attention

records continuously. If the alarm record occurred, the DVR remains recording continuously and you can find the alarm event through “event search” or

46 Backup. If you choose “OFF”, this function is disabled.  SETUP-REC-EVENT: Setup of the event record (Fig3.2.16 Setup event record)  MOTION DET

[SETUP-REC-EVENT(S/D)]Fig3.2.18 Setup sensor detection  SENSOR DETECTION: Each channel matches a relevant Sensor, for example, Channel 2 is l

choose: 2 seconds, 4 seconds, 6 seconds, 8 seconds and10 seconds.  POP-UP SCREEN: If you choose “ON”, the image will be in full screen when the DVR g

[SCHEDULE REC-CH 4]TUWETHSAFRALL DAYALMOFig3.2.21 setup schedule record timeSU “0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 312” means: “0 1

5Appendix C The meaning of some abbreviation ... 91

Press enter key to visit the menu, information is given below (Fig3.2.23 Information of deletion) “DELETE FILE 0171 200 60407_170000 15AS D U

51 LOCK/UNLOCK: Lock/unlock the record. Use enter key to change the status (Fig3.2.24 Lock/Unlock file). If the file is locked, then the record ca

[ENTER]→ YES [MENU]→ NO” (* represents A，B，C，D) Press enter key to format the HDD, Press menu key to cancel this operation. Attention: The format

 STATIC: Static IP address. Push “Up” “Down” “left” “Right” to move the cursor among the digits and push ADD or DEC key to modify the IP address. (Fi

 The local area network has DHCP server  The DVR can get IP address automatically from internet  PPPOE: Connect to network by ADSL mode

Dynamic domain service. To use this function, user need to get a domain from the ISP, whose protocol is packed in this DVR, as above list .Please not

 Login Return to home page after registering successfully. Click “Account manager” in the right of home page to login. 56

Username is User ID set before, which is “abc”. Password is set before, which is “123456”. Click “Enter” button after filling out.  Domain setup Cli

 The length of probationary period is one month. If user wants to use it over one month, please click the “Buy now” in the right of home page to pay

If the connection fails, the system prompts: Check the network and the information before, and then try again.  Application Connect the DVR to inte

6 Digital Video Recorder (DVR) Introduction 1.1 Product introduction This DVR is designed specially for CCTV system. It adopts embedded processor a

Port 1 is used for logon; Port 2 is used for controlling the DVR; Port 3 is used for live surveillance; Port 4 is used for backup; Port 5 is used for

other IP access the DVR.  NETWORK THROUGHPUT: To setup the transfer speed of DVR in the network. There are nine options to choose: unlimited, 64K

“NC” means normal close. If “NC” is chosen, the DVR will give the alarm if the alarm is at high level.  ALARM MOTION MANAGER (Fig3.2.35 Alarm mot

channel 3 for alarm 1, then any of the 3 channel detects motion event, alarm 1 will send signal.  ALARM SENSOR MANAGER (Fig3.2.36 Alarm sensor m

for alarm 1, any of the 3 sensors is activated, the alarm 1 will send alarm signal.  ALARM BUZZER (Fig3.2.37 Alarm buzzer) ON: Start the buzzer when

 ALARM OUT PERIOD (Fig3.2.39 Alarm output period) Alarm continuing time. There are five options to choose: 30 seconds, 1 minute, 3 minutes, 10minutes

66 There are four audio input ports and one audio output port in all. One audio input matches one channel. For example, if user selects audio

interface, there will be three HDDs and one CD-ROM displayed. [STATUS]S/W VER: V1.0.10-tv_16(06/05/08 10:07)[HDD] A: 150G(63%) B: NONEC: NONE

3.3.3 BACKUP& VIEW BACKUP  Backup Press the Backup button (Fig3.3.3 Setup backup). This DVR support five media types: CD-R, CD-RW, DVD-R, DVD

backup in CD-R, please choose CD-R; if you plan to backup in CD-RW, please choose CD-RW, etc…  BACKUP BASE: If you want to search the file needed to

7 Various recording resolutions, D1，Half D1 and CIF Support channel security by hiding live display Display the local record state and the bas

 If the backup base is “FILE”, the “START” choose menu is as Fig3.3.5 Backup start (file) showing.  If the backup base is “TIME”, the “START” choose

screen in the same time with backup. The USB backup process is as the Fig3.3.8 USB backup process showing, that is the same as backup with the CD/DVD

: Play : Pause : Stop : Fast backward : Step b

 Particular introduction of W.M Check, SnapShot. W.M Check (Water Mark Check) When the backup file is paused, click this button to check water mark

After a few minute, the result will pop up. If the backup file is changed or moved, the system will pop up “Watermark Check Fail”, if the backup file

75please press CANCEL. 3.3.4 PAN/TILT Move cursor to PAN/TILT in the function menu, press Enter button to access this menu (Fig3.3.9 PAN/TILT) to c

controller. PAN/TILT<<Ch1>>Fig PAN/TILT3.3.9AUTOPAN ENTER ZOOM/FOCUSZ+Z-F+ F-<<Ch1>>Fig3.3.10 ZOOM/FOCUS 3.3.6 SEQUENCE Pr

four channels by four channels circularly. 3.3.7 LOG LIST Press the Log button on the remote controller, the system will enter the setup m

78 should choose the option needed manually. There is a white dot in the blank after the option selected. FROM: The beginning time of the log f

3.4 Search record Press the “Search” button on the remote controller, there are three search modes which will be displayed on the screen (Fig3.4.1 Sea

8 Support HDD recycle Up to 16CH playback, fast forward（2X，4X，8X，16，32X，64X and 128X）and slow forward modes; play the record frame by frame; jo

search.  TIME SEARCH: Attention: All the record can be searched in this menu. Operation:  Date choose: Press enter to access the CALENDAR TIME me

Press Enter button to view the record chosen, the “Forward” “Backward” “Play/pause” buttons can be used to control the record. Press “stop” button

“Forward” “Backward” “Play/pause” buttons can be used to control the record. Press “stop” button to get back to live picture. If there are too many

FIRST To the first page Forward button  FILE SEARCH Attention: All the record can be searched in this menu. Operation:  Select the date, whos

84  Select the record and press “Enter” button to view this record. Use “Up” “Down” to choose the file record, Press enter button to view the reco

Attention: There is no setup menu in the screen of spot monitor. 85

86 Appendix Appendix A Main Standard & Parameter chart Model 16Channel VIDEO Input Channel 16CH Input Level 1.0Vp-p±10% Composite, 75Ohm B

87 Function Auto Sequence Screen Split, PIP AUDIO Compression ADPCM Audio In / Out 4CH /1CH Input Level TBD(0.5~1.4Vp-p@20Kohm) RECORDING Compr

88 Speed 5400RPM, 7200RPM Type EIDE compatible SEARCHING & PLAYBACKSearching Method Time, Event, File REMOTE SURVEILLANCEMonitoring Environme

External Control (RS-422/485) Terminal Block Sensor Input Terminal Block Alarm Output Terminal Block PTZ (RS-485) 2Pins Terminal Block Ethernet RJ

9 Support IE browser, for remote view (automatically download active-x )

Appendix B Record capability --how much capability does record engross per hour PAL NTSC Picture Quality Resolution Total Frame Rate CapabilityResolu

91Appendix C The meaning of some abbreviation Words Meaning Words Meaning D 720*576(PAL)/720*480(NTSC) H 720*288(PAL)/720*240(NTSC) C 360*2

MPEG4 Standalone DVR Password reset instruction: To the password reset, Press : [INFOR] + [AUDIO] + [SEARCH] + [STOP] + [4X4] on the remote control.

1 Manual Of Remote surveillance *This manual is tailored for 4/9/16 channels digital video recorder *This manual takes 16-channel digi

2 Table of Contents 1 IE remote operation...

Remote live surveillance This DVR supports remote surveillance through LAN, Intranet and Internet. After connected to the network, the DVR function

software, the dialogue box is as following: Click “Install” button to install IE client. If click “Don’t install” button, user can not operate DVR

1.2 Login Read the IP address from the DVR and fill out the IE address column with it. Then press enter or click 5

to visit the Web Client of DVR and a dialog box pops up (Fig 1.1.1 Login). ID, password and Port have been set in the Network setup of DVR 6

7Enable Overlay: If user’s VGA card supports overlay function, the display performance works better with this option selected. Users have to disable