COP Security XT Series Manual de usuario descargar pdf (Pagina 36)

Simon XT

User Manual

Set clock

If the panel loses both AC and battery power, then upon restoring power the system time will default to

midnight and blink, indicating it has not been set correctly. Your installer can set your system time to display in

either 12-hour or 24-hour format.

Time of day format is HH:MMx

Where:

HH = 01 to 12 (12-hour format) or 00-23 (24-hour format)

MM = 00 to 59

x = a or p (12-hour format) or none (24-hour format)

To reset the clock:

1. Scroll up/down until the display shows Set Clock.

2. Press Enter.

3. The display shows Enter Code.

4. Enter your master code with numeric keys. Press Enter.

5. Press Enter again. The display now flashes the hours.

6. Scroll up/down to set the hours.

7. Press the Enter key to accept. The display now flashes the minutes.

8. Scroll up/down to set the minutes.

9. Press the Enter key to accept. The display is now flashing the AM/PM.

10. Scroll up/down to set the AM/PM.

11. Press Enter to accept. The display now shows the current time, and stops flashing.

12. Press STATUS twice to exit.

System Tests Sensor Test

Comm Test

System Download

Revision

Contrast

Table 12. Simon XT system menu structure (continued)

Top menu entry First submenu level Second submenu level

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Sin comentarios

COP Security XT Series Manual de usuario Pagina 36